novak gtb voor 4cellen!!!
Includes six throttle profiles specifically designed for 4-cell racing
25% lighter and 30% smaller height profile than the #1710 GTB ESC
User-friendly programming interface with 4 status LEDs
Novak’s One-Touch Set-Up (still the easiest)
Gold-Plated PCB Direct-Solder Wiring Tabs
Re-solderable user-replaceable input harness
Re-solderable user-replaceable switch harness
Thermal Overload Protection
Water-resistant case
Radio-Priority Circuitry
Polar Drive Circuitry
Designed and Manufactured in the USA
4 Adjustable Parameters (5 in Brushed Mode):
Minimum Brake
Drag Brake
Dead Band
Minimum Drive
Drive Frequency (In Brushed Mode Only)
GTB 4-CELL ESC SPECIFICATIONS
Forward/Reverse: Forward and Brake (1 Brushless Profile w/Reverse)
Input Voltage: 4 Ni-Cd/Ni-MH cells (1.2V/cell)
Footprint: 1.16” x 1.49” (29.5 x 37.8 mm)
Height: 0.61” (15.5 mm)
Weight: 1.01 oz. (28.5 g) -- with heatsinks and without wires
Motor Limit: 3.5T brushless motor; No brushed motor limit
On-Resistance: 0.00040 ohms (brushless)*, 0.00013 ohms (brushed)*
Rated Current: 540 amps per phase (brushless)*, 1620 amps (brushed)*
Braking Current: 540 amps per phase (brushless)*, 1620 amps (brushed)*
BEC: 6.0 volt**/3.0 amp
Discrete Steps: 1024 Forward; 1024 Reverse
Power Wires: 16-Gauge
Battery Plug: None
Motor Plug: None
Status LEDs: 4
* Mosfet rating at 25 degrees Celsius junction temperature
** When available due to battery pack voltage